Jak zmienić siatkę kosza

Ten Video poradnik pokazuje jak dobrze zmienić siatkę w napędach SCOUT.
Rzeczy i narzędzia które potrzebujesz do wykonania naprawy:

Uszkodzony element
Nowy element
14 sztuk siatki z Dyneemy
14 sztuk nitów w rozmiarze  2.4mmx6mm  (najlepiej z czarnym łbem)  
Nożyczki
Pistolet do nitowania

Krok pierwszy:

To be able to fit the netting on the new part we will have to remove it from the broken  section by cutting off the dyneema loops that connect the netting with the outer hoop section.
Once the cutting procedure has been done you will have to remove all leftover dyneema  pieces from the netting.

Krok drugi:

Now you will have to make a loop from the little dyneema loops. It is easy and simple just pull one end of the loop through the eye of the netting than feed it through the other end of the dyneema loop.

Krok trzeci:

Grab the new outer hoop section place it front of you so that it sits flat and with both ends facing upwards.  We will start from left to right (it does not matter from which side to which side you will proceed). Now grab the first loop you have created in the second step an put it inside the first hole on the outer hoop section. Once you have done that, grab a rivet put that inside to in the same hole. Keep hold of the rivet and pull it until you feel a bit of a resistance. Now do the same on the remaining 13 holes.

Krok czwarty:

Grab the rivet gun push its nozzle on the rivet and keep squeezing until it pops. Do the same on all the rivets.